 Posted: Fri Nov 11, 2005 6:29 pm Post subject: Re: convergence |
|||
If possible, could you please send me the instruction to access the service menu. Please e-mail me at [email protected]. Thanks a lot! D. YANG PS. My TV model: KP-53V75 |
|||
| Posted: Tue Feb 15, 2005 12:36 pm Post subject: Re: convergence |
|
| I actually was able to fix it by playing around with the service menu.. | |
| Posted: Tue Feb 15, 2005 1:17 am Post subject: convergence |
|
| Have you adjusted the tubes in the back? You can make adjustments easily. In the front there are fine tuning adjustments behind the speaker
grill. I bet that will do it, I assume you already did the adjustment for convergance in the menu, simply make the cross white. If not you need a code for technical use, but I don't think you want to go there. |
|
| Posted: Fri Nov 05, 2004 7:26 pm Post subject: Sony KP-53V75 Projector Convergence Problem? |
|
| Hi,
My projector have started to act a bit weird.. On the right edge side of the tv screen, the picture have been shifted to the left by about 1.5cm.. there is like a black vertical line now.. And on the top right corner the red convergence is off, I can barely read any text or number in that area.. But any where else the picture is fine, with a bit of the Blue convergence being off but not to the extent that I can't watch tv.. Anyone know what might be wrong? It doesn't look like the pincushion problem cause it only happening on the right side and the line is somewhat still vertical striaght. Any help would be helpful.. Thanks.. |
|