 Posted: Wed Mar 28, 2007 8:14 am Post subject: |
|
| Hi,
The above message is mine. I didn’t read the subject as I read it after a search. I do know the problem is from the same TV. A fellow wrote me this about the same problem, I don’t know if it’s for the same TEAC TV. “I have just talked to Frank, our TV main technician. He has seen a fault like this on this TV before, and recommends replacing the inductor with a 1ohm fusible resistor.” Cheers José Flor |
|
| Posted: Tue Mar 27, 2007 5:49 am Post subject: Re: TEAC CTV model CT-F5170 |
|
| [quote="vk6fh"]I have a Teac Color TV with exactly same problem. The small inductor was o/c but not completely burned up! From the colour bands it looks like 27 uH
I substituted a 33 uH of a larger physical size, boxed up the set and it seems to work just fine. Maybe its a weak point in this model. I post this info for anyone stumbling along the same troubleshooting path !!!!! Cheers Frank Hughes VK6FH Western Australia...[color=black][/color][/quote] Is this the CT-F5170 model and the inductor is the L401? I have that same problem and I don't now the inductor value. Thanks [email protected] |
|
| Posted: Sun Dec 03, 2006 10:04 am Post subject: TEAC CTV model CT-F5170 |
|
| I have a Teac Color TV with exactly same problem. The small inductor was o/c but not completely burned up! From the colour bands it looks like 27 uH
I substituted a 33 uH of a larger physical size, boxed up the set and it seems to work just fine. Maybe its a weak point in this model. I post this info for anyone stumbling along the same troubleshooting path !!!!! Cheers Frank Hughes VK6FH Western Australia... |
|
| Posted: Sun Jun 25, 2006 5:13 pm Post subject: Need TEAC CT-F5170 scheme |
|
| Can anyone help with this scheme as it is not in eservice archives.
The reason being I need the value of the inductor that comes off pin5 of the LA78040 vrt ic. It's burnt beyond recognition. Hope the vrt ic is'nt fried. 
Cheers if you can help, SCR. |
|