| Author |
Message |
| gary |
 Posted: Mon Jul 10, 2006 4:03 pm Post subject: |
|
| there is no real default, the adjustments are there to correct the geometry settings for each set, input a cross hatch pattern or test card and set up to obtain straight vertical lines at sides, may take a while as one adjustment will influence another. |
|
 |
| Guest |
| Posted: Sat Jul 08, 2006 3:26 am Post subject: |
|
| The picture etc is fine its just the width and bow edges ive made a hiccup on. Just want to get it back to as near to default as possible. |
|
|
| gary |
| Posted: Fri Jul 07, 2006 10:48 pm Post subject: |
|
| MANY OF THE SETTINGS ARE MODEL AND FEATURE DEPENDENT, OTHER SETTINGS VARY DEPENDING ON MAKE OF INTERNAL PARTS ie, ALPS TUNER OR OTHER, AUDIO PROCESS IC TYPE ETC. BEST BET IS TO DOWNLOAD A MANUAL AND WORK THROUGH THE FEATURES AND COMPONENTS RELATIVE TO YOUR TV OR OBTAIN A NEW EEPROM AND START FROM SCRATCH. WHEN A TV COMES INTO US FOR REPAIR AND SOMEBODY HAS BEEN MESSING IN THE SERVICE MENU WE EITHER REPLACE THE EEPROM OR SCRAP THE SET. |
|
|
| deanrparry |
| Posted: Fri Jul 07, 2006 8:05 pm Post subject: Bush 32" Widescreen 11AK19B |
|
Desperately need eprom settings for Bush 32" Widescreen 11AK19B ill admit i changed them and ive made a right mess.
Please can someone help? |
|
|