 Posted: Sat Jun 28, 2008 9:16 pm Post subject: |
|
| I replied to your other post. | |
| Posted: Sat Jun 28, 2008 7:17 pm Post subject: |
|||
Hello, I have the same problem, but my degraged from that inot the rolling screen that only goes away after a few hours... Where is this VP connector? Is it the connector that the pip board connects to? thanks for your time. |
|||
| Posted: Wed Jul 12, 2006 5:34 am Post subject: |
|
| It is likely the PIP modual is bad. you can bypass it by removeing it and jumpering pins 5 and 11 with a 47m/50v np cap and pins 7 and 9 with a .1m/50v np cap jump pins in the VP connector. you will no longer have PIP but will clear up the picture. | |
| Posted: Tue Jul 11, 2006 12:26 am Post subject: re: how wide are bars |
|
| the bars
webpages.charter.net/jeremymayle/tv.jpg |
|
| Posted: Mon Jul 10, 2006 9:31 pm Post subject: |
|
| How wide are the lines/bars? If they are retrace lines you will need to set the screen/colour controls as per the manufacturers procedure. If they are hum bars you may need to replace filter capacitors. Measure the B+ and make sure it is in spec. with minimal high frequency ripple. | |
| Posted: Mon Jul 10, 2006 10:26 am Post subject: Problems with Mitsubishi CK31302 Console TV...PLEASE HELP! |
|
| I just recieved a Mitsubishi CK31302 console TV for free, it only has one problem, the picture has continuous faint slightly-diagonal lines/bars that I can't get rid of. I've tried the "screen" and "focus" dials on the back and can't find any other dials...looks like maybe a V-hold problem but the picture doesnt bounce.
Here's the image of what it's doing... >>>WHAT THE HECK MAN, IT BLACKLISTED ME FOR POSTING A PIC OF IT???<<< -J Mayle [email protected] |
|