 Posted: Fri Aug 11, 2006 10:03 am Post subject: |
|
| Thanks for the tip... will give it a try! | |
| Posted: Fri Aug 11, 2006 9:56 am Post subject: |
|||
Yes, that is possible. In fact, could be a short in any of the speakers or cables that trigger the "Protect" mode. The best is to dis-connect all existing speakers & try out with a pair of good speakers. |
|||
| Posted: Fri Aug 11, 2006 8:07 am Post subject: |
|
| I haven't tried w/o the speakers... The power comes on, but no sound. One set of speakers is in the house, with wires snaked through the walls. The other is outside... Could a short in the outside speakers short out the whole unit? | |
| Posted: Thu Aug 10, 2006 10:30 am Post subject: |
|
| Hi,
Could be due to short in speaker or speaker cables?? Does the receiver come back on when u power up without speakers? Try using the headphones only to test. Your receivers should still work as most have a Protect mode in over current situations. Cheers. |
|
| Posted: Wed Aug 09, 2006 10:00 am Post subject: two receivers shorted out |
|
| Can anyone help with this problem? I had an old JVC receiver hitched up to two sets of speakers -- one in my kitchen, and one outside on the deck (all weather Boston Acoustic speakers -- about a year old). Everything worked fine until about two weeks ago, then the receiver seemed to have died -- no music from either set of speakers. I figured it had just crapped out. So I attached my Onkyo receiver and had sound from all four speakers -- inside and out. But as I cranked the volume, I got a crackling sound. The music faded momentarily, then came back. It worked fine for a few hours, but after I shut off the receiver, it wouldn't come back on later. It too appears to be fried.
Any ideas on what would cause both receivers to short out -- even though everything had worked fine until about two weeks ago??? I'm stumped. lkirk |
|