Author |
Message |
ferdagb |
Posted: Sun Sep 30, 2007 6:48 pm Post subject: Blaupunkt car300 |
|
I need some help how I can enter the code. I have the code but not the manual of the tape. Due some electrical cut off of my car I can't use my radio. It only shows safe. Driving in silence is making me crazy. Tnx in advance |
|
|
electronblue |
Posted: Wed Sep 26, 2007 1:08 am Post subject: Exit Lacie Electronblue service menu mode |
|
NB: To exit service mode and re-enable normal power saving, power on while holding EXIT and both ADJUST buttons (-/+) |
|
|
electronblue |
Posted: Tue Sep 25, 2007 10:14 pm Post subject: Lacie Electronblue IV 19" Service Mode - How To |
|
For others who have been searching for how to do this: Hold down Adjust buttons (+ & -) and "Select" on power up, then use the "Exit" button to bring up the menu - now with red top and bottom bar, in factory / service mode. RGB Bias, and lots of other options now available. No thanks to NEC for this one whatsoever (it's a rebranded Diamond Pro 930SB) |
|
|
dbboy |
Posted: Thu Dec 08, 2005 1:07 am Post subject: schematic |
|
I also need a schematic for lacie monitor nfk9905 marked nec/misubishi can you help reply at [email protected] |
|
|
soco |
Posted: Thu Nov 25, 2004 3:43 pm Post subject: LACIE |
|
Need service manual for Lacie Electron Blue II 19'' Thanks |
|
|