Author |
Message |
dany12742 |
Posted: Mon Sep 04, 2006 1:58 pm Post subject: |
|
check ABL or +b in horizontal output, possible fail in power source |
|
 |
nikUK |
Posted: Sat Sep 02, 2006 4:35 pm Post subject: |
|
thanks gary..will check it out.. |
|
 |
gary |
Posted: Fri Sep 01, 2006 10:40 pm Post subject: |
|
HIGHLY UNLIKELY TO BE AN ADJUSTMENT IF IT VARIES WITH PICTURE CONTENT, I WOULD SUSPECT A BEAM LIMITER FAULT CAUSING THE PICTURE TO "BREATHE", CHECK R520, R543, R557, R544 FOR HIGH IN VALUE. |
|
 |
nikUK |
Posted: Fri Sep 01, 2006 7:18 pm Post subject: sony KV28DS60U picture problem |
|
im after general pointers as to the cause of my problem..
the picture seems to move in/out depending on what is being displayed..brightness related i guess..
also there is distortion on the corners..bending inwards though not all the time again dependent on the picture being displayed..
i have access to the electronic screwdriver menu but will not adjust anything until i have some rough idea as to what setting to change..im guessing its related to the pin cushion/level settings but need help please..
regards
nik |
|
 |