 Posted: Mon Sep 04, 2006 3:27 am Post subject: |
|
| Ok, it was the tube.
Changed over the green and blue inputs to the back of the CRT. (Suggested on another site) Also tried hitting the screen with a wooden mallet. Screen stayed green and fried the resistor on the blue chanel.  Ah well it was fun trying!
Thanks for your input Kevin |
|
| Posted: Sun Sep 03, 2006 1:30 am Post subject: |
|
| I've taken out the resistor and it's definitely open circuit ( or larger than 2 mega ohm ) Can someone tell me what it should be, it's too blackened to read ?
Kevin |
|
| Posted: Sun Sep 03, 2006 12:24 am Post subject: |
|
| resistor 3349 on the CRT board looks blackened and seems to be reading open circuit. Relevant? Cause or effect?
Kevin |
|
| Posted: Sat Sep 02, 2006 11:29 pm Post subject: Re: philips 32pw6822/05 green screen |
|
| Forgot to mention - it's ok or the first two minutes then it blips into 'green' mode. If it's on for a long time some of the picture comes back through the green.
Kevin |
|
| Posted: Sat Sep 02, 2006 7:05 pm Post subject: Re: philips 32pw6822/05 green screen |
|
| [[/quote]
hi most probably it is the tube if it is fitted with philips tube. zain[/quote] So throw it away ?
Kevin |
|
| Posted: Sat Sep 02, 2006 5:32 am Post subject: Re: philips 32pw6822/05 green screen |
|||
hi most probably it is the tube if it is fitted with philips tube. zain |
|||
| Posted: Sat Sep 02, 2006 5:22 am Post subject: philips 32pw6822/05 green screen |
|
| the TV shows an entirely green screen with a broad green raster (flyback lines?) overlaid. Any ideas would be appreciated. I'm a novice so specific instructions would be really valuable.
Thanks |
|