Author Message
msu
PostPosted: Sat Mar 03, 2007 1:13 pm    Post subject: Re: Philips FSQ Vision - Tuning and colour problem
Your remote is made by a company called Universal Electronics. From the details shown in the following document:

http://www.telefonicaonline.com/on/io/es/atencion/soporte_tecnico_y_averias/television/manuales/descodificador/ManualDescodificadorADBv1.pdf

It appears that it one of their Focus range of remotes.

http://www.uei.com/category.php?page_id=213&featured_product=34

If you try to look for its code using exact remote model number then it would help.

Good luck.
Guest
PostPosted: Sat Mar 03, 2007 11:52 am    Post subject: Re: Philips FSQ Vision - Tuning and colour problem
msu wrote:
Anonymous wrote:
Anonymous wrote:
coiki wrote:

hi! i just bought an old philips FSQ vision... and i was trying to set up my universal remote control but i just can't find the code!! do you know any code that might work??


Are you trying to use sky/ ntl remote or any other after market universal remote?


yes! i live in spain i'm trying to use a sort-of-direcTV system, called Imagenio, wich uses a decoder called.. iCan3100TW by ADB, thanks! Very Happy


I managed to program ntl remote with code 406 and sky remote with code 584.


I tried both codes, but the remote won't accept them, it's a 4 digit code... i even tried "0406" "4060" "0584" and "5840", but the remote LED won't blink twice, meaning that the code has been accepted. Sad
msu
PostPosted: Thu Mar 01, 2007 10:54 pm    Post subject: Re: Philips FSQ Vision - Tuning and colour problem
Anonymous wrote:
Anonymous wrote:
coiki wrote:

hi! i just bought an old philips FSQ vision... and i was trying to set up my universal remote control but i just can't find the code!! do you know any code that might work??


Are you trying to use sky/ ntl remote or any other after market universal remote?


yes! i live in spain i'm trying to use a sort-of-direcTV system, called Imagenio, wich uses a decoder called.. iCan3100TW by ADB, thanks! Very Happy


I managed to program ntl remote with code 406 and sky remote with code 584.
Guest
PostPosted: Wed Feb 28, 2007 5:01 pm    Post subject: Re: Philips FSQ Vision - Tuning and colour problem
Anonymous wrote:
coiki wrote:

hi! i just bought an old philips FSQ vision... and i was trying to set up my universal remote control but i just can't find the code!! do you know any code that might work??


Are you trying to use sky/ ntl remote or any other after market universal remote?


yes! i live in spain i'm trying to use a sort-of-direcTV system, called Imagenio, wich uses a decoder called.. iCan3100TW by ADB, thanks! Very Happy
Guest
PostPosted: Tue Feb 27, 2007 11:44 pm    Post subject: Re: Philips FSQ Vision - Tuning and colour problem
coiki wrote:

hi! i just bought an old philips FSQ vision... and i was trying to set up my universal remote control but i just can't find the code!! do you know any code that might work??


Are you trying to use sky/ ntl remote or any other after market universal remote?
coiki
PostPosted: Tue Feb 27, 2007 9:27 pm    Post subject: Re: Philips FSQ Vision - Tuning and colour problem
msu wrote:
Hello,

For last two weeks or so my old Philips FSQ Vision has started forgetting tuning and colour settings. I have set a Sky box at channel 9. When I switch the TV off or put it on standby it forget its setting and every time I have to tune again and turn the colours on to make the picture coloured.

Any simple fix to this problem?

Regards



hi! i just bought an old philips FSQ vision... and i was trying to set up my universal remote control but i just can't find the code!! do you know any code that might work??
gary
PostPosted: Wed Sep 20, 2006 4:04 pm    Post subject:
doesn't matter as current required is very low.
msu
PostPosted: Wed Sep 20, 2006 6:36 am    Post subject:
gary wrote:
that is the battery, if it is 2 sections in 1 tube it is a 2.4v nicad battery, dont replace it with a bios battery it may explode as the tv charges the battery when turned on, standard nicads would do the job perfectly as the originals are just 1/2 size nicads.


Thank you for your response gary.

The battery is in two section and in two small tubes (connected togather through a stip). As per your suggestion I will use a pair of rechargeable Ni-Cd batteries (1.2V each). I wonder if I should go for AAA or AA type?

Regards
gary
PostPosted: Tue Sep 19, 2006 4:20 pm    Post subject:
that is the battery, if it is 2 sections in 1 tube it is a 2.4v nicad battery, dont replace it with a bios battery it may explode as the tv charges the battery when turned on, standard nicads would do the job perfectly as the originals are just 1/2 size nicads.
msu
PostPosted: Mon Sep 18, 2006 6:10 pm    Post subject:
gary wrote:
replace the internal memory backup battery, 1.2v or 2.4v depending on model.


Today I opened my TV. The only thing that appears very close to backup battery is a two sectional yellow round item (like capacitor but in paper casing rather than plastic), joint togather through a strip and placed horizonally just behind the main control knobs. They have flat strip connection to circuit board. It is showing only 0.023V (with TV off) and the only thing I can read is a + sign on one section and letters CLC.

Any idea what size of batteries they are (1.2 or 2.4V) and can I use any other backup batteries (say computer bios, or simple Ni-Cd rechargable batteries) of similar rating?

Thanks

Powered by phpBB © 2001,2002 phpBB Group