Author Message
JBOlac
PostPosted: Sun Oct 22, 2006 8:39 pm    Post subject: Re: Xerox WorkCentre XD 125f

edu_silva wrote:
Hi friends:

I need ur help.
My XD 125f show me the code error H4. When i press the "copy switch" show me 00. Crying or Very sad

Thanks for ur help. Wink


Edward
[email protected]



Dear Friend:
That condition -almost the time- shows a condition of failure in the power line, it can be disabled resseting the machine as follows: enter the diagnostics condition pressing C, Auto(contrast), C, auto(contrast) ; in that order and in less than 4 seconds,the panel control turns all its indicators off, then enter 14 in the copy quantity panel control, press start copy. This action reset the faulty condition H4, this condition in the service manual says its a trouble with the fuser system. Preheat to much heat or thermister failure. Good Luck!
edu_silva
PostPosted: Sun Oct 22, 2006 4:12 pm    Post subject: Xerox WorkCentre XD 125f

Hi friends:

I need ur help.
My XD 125f show me the code error H4. When i press the "copy switch" show me 00. Crying or Very sad

Thanks for ur help. Wink


Edward
[email protected]

Powered by phpBB © 2001,2002 phpBB Group