[dankas100]

Hi!
i had a convergence problem at following projector, so i replaced both of the STK392-110 and the solved i started to adjust the convergence by the remote control and through the adjusment the projector has been shuted down and the S.BY LED started to flash 3 times, i suspect the 24LC16 memory ic but i can't reach the hex file please send me this file or if some one have another idea of what wrong in the projector please tell me also if some have the diagram of this projector it can help (by the way i also tried to turn on the projector without the vertical ic), thanks for your help.