| Author |
Message |
| Guest |
 Posted: Sat Dec 23, 2006 10:38 pm Post subject: National TV: TC-231VR, sound starts with high volume |
|
| Not sure of this set but I would ensure the sound level is stored as some sets have separate storage levels for initial switch on. Consult the operating instructions first. If after doing this the problem remains then check if this set uses a soldered in backup battery for retaining memory although I would have expected other functions like colour to be off also or if eeprom the voltages are correct for writting to memory or try another eeprom. |
|
 |
| Alu |
| Posted: Thu Dec 21, 2006 2:32 pm Post subject: |
|
What do you mean by fix around IC. What do i have to do ? resolder ? And can it be the only problem.
Alu |
|
|
| Alu |
| Posted: Sun Dec 10, 2006 6:03 pm Post subject: |
|
| Help |
|
|
| Alu |
| Posted: Fri Dec 08, 2006 5:00 am Post subject: |
|
What do you mean by fix around IC. What do i have to do ? resolder ? And can it be the only problem.
Alu |
|
|
| Guest |
| Posted: Wed Dec 06, 2006 3:05 pm Post subject: Re: National TV: TC-231VR, sound starts with high volume |
|
| Alu wrote: |
I have an Old National TV TC-231VR, which is still working properly but always when I turn it on the sound starts with high volume. Even when I turn it off with less volume, when it is on it starts with high(last) volume. So what can be the fault ? Hep
Alu |
Open it and fix around IC sound amplifer, |
|
|
| Alu |
| Posted: Wed Dec 06, 2006 9:23 am Post subject: National TV: TC-231VR, sound starts with high volume |
|
I have an Old National TV TC-231VR, which is still working properly but always when I turn it on the sound starts with high volume. Even when I turn it off with less volume, when it is on it starts with high(last) volume. So what can be the fault ? Hep
Alu |
|
|