| Author |
Message |
| mr pig |
 Posted: Tue Dec 19, 2006 8:20 pm Post subject: |
|
| Quote: |
| NIGHTMARE TO FIT THOUGH!!!! |
I'll bet! I've had the thing apart already, trying to have a look at the CD mech, and I gave up. The whole machine is bolted to the CD mech box and has to come off before you can get into it by the look of things.
Thanks for that info Gary. Merry Christmas to you :0) |
|
 |
| gary |
| Posted: Tue Dec 19, 2006 5:11 pm Post subject: |
|
| SEMENEDIS LIST PICKUP AS ORDER REF APAR4287 @ £13.34 + VAT NIGHTMARE TO FIT THOUGH!!!! |
|
|
| mr pig |
| Posted: Tue Dec 19, 2006 4:42 pm Post subject: |
|
| Cheers Gary. It's a UD-M5, the one which unfortunatly has the CD mech at the bottom! :0( |
|
|
| gary |
| Posted: Tue Dec 19, 2006 9:16 am Post subject: |
|
| dont know what the type is as you never posted the model number but they are not difficult to obtain. |
|
|
| mr pig |
| Posted: Mon Dec 18, 2006 6:09 pm Post subject: |
|
| Is it a standard part that could just be swaped over? |
|
|
| gary |
| Posted: Mon Dec 18, 2006 5:50 pm Post subject: |
|
| even if it could be adjusted it would only be delaying the enivitable, it needs to be replaced. |
|
|
| mr pig |
| Posted: Mon Dec 18, 2006 4:56 pm Post subject: |
|
| Quote: |
| probably the laser assy |
Worn out do you think or maybe just needing ajusted? To be honest the thing is so hard to take apart that either sounds terminal. |
|
|
| gary |
| Posted: Mon Dec 18, 2006 9:19 am Post subject: |
|
| probably the laser assy |
|
|
| mr pig |
| Posted: Sat Dec 16, 2006 10:29 am Post subject: Skipping CD Changer, Likely Cause? |
|
Skipping CD Changer, Likely Cause?
I have a Denon micro system with a three CD multi changer that struggles to get up and running, skips easily etc. It seems to me that the mech is having trouble getting the data off the disk.
What is the most likely reason for this fault and is it repairable cost effectively?
Thank you. |
|
|