 Posted: Mon Jan 01, 2007 12:12 am Post subject: |
|
| First thing. plug the set , don't turn on power, You should check voltage at the BIG CAP {MAIN SMOOTHING CAP}. You should have 155v more or less.Then see if you have same volts at midle leg of the Hot (C)not the other legs, if volts at the hot {C}is higher then at the main cap, probably is running ok, your problem is some othe place, | |
| Posted: Sun Dec 31, 2006 6:22 pm Post subject: Sanyo CE28DFN3B |
|
| This set will not come out of standby and I cannot find a service manual nor the type of chasis.
Can anybody help? Many thanks, |
|