Electronic equipment repair and service manual search discussion :: Topic review

jts1957 · Posted: Wed Nov 09, 2011 4:02 am Post subject:

http://www.eserviceinfo.com/downloadsm/19270/Philips_55PP9401.html

jeffehi · Posted: Wed Nov 09, 2011 2:41 am Post subject:

do you have the schematic/pdffor the phillips 55pp9401?

snmfrye · Posted: Sat Mar 21, 2009 2:40 am Post subject: tv

Do you have the info on RK97 That is the only one I need that you dont have

snmfrye · Posted: Sat Mar 21, 2009 2:39 am Post subject: tv

[quote="Anonymous"][quote="minnie"]Replace the STK392-110's. Could be STK392-150's. Resister values:
Resistor Location Value Part #
RK42 3.3 Ω 1 W AT03202S
RK46 1.8 Ω 1 W AT03195S
RK50 3.3 Ω 1 W AT03202S
RK54 1.8 Ω 1 W AT03195S
RK58 3.9 Ω 1 W AT03204S
RK62 2.2 Ω 1 W AT03197S
IK04 & IK05 STK394-160E CZ01341

STK394-160's are the newest replacement.[/quote]
I really have no clue what those part numbers are representing, could I just take a pic of the board and you tell me which ones to replace?
Are these Radio Shack parts or somewhere else?
Thanks.
Mark[/quote]

minnie · Posted: Wed Feb 25, 2009 12:30 am Post subject:

Tony1069 · Posted: Tue Feb 24, 2009 5:28 am Post subject: TV

Yes different tv. But same part and problem. JK07132-A
I could not locate a thread with my paticular tv.

jts1957 · Posted: Mon Feb 23, 2009 5:49 am Post subject:

Since when is a Hitachi a Philips?
(Although you're not the first to do so.)
Maybe should start a new thread.

Just doing a search for "RK58" found a number of threads, including a post on this very thread).

Tony1069 · Posted: Mon Feb 23, 2009 4:40 am Post subject:

Ok I have a Hitachi 53FDX20B and yes my colors are off.
Yes my dynamic focus board has toasted resistors.
I can visually see rk58 is fried. I cannot make out the color code.
does anyone know the resistor value?
Also is there any others that I should change out for safty sake?
It seems that they are testing out good so far with my meter.

awtoys · Posted: Sat Jan 31, 2009 7:11 pm Post subject:

Thank minnie, ichage the stk. but i not sure the value resistors, one of then reading 42 ohms, other 17 and when verify the other circuit the resistor are very low.

minnie · Posted: Thu Jan 01, 2009 6:56 pm Post subject:

http://www.matelectronics.com/