| Author |
Message |
| minnie |
 Posted: Tue Jan 09, 2007 4:42 am Post subject: |
|
| Solder up the vertical ic to start. |
|
 |
| Frank |
| Posted: Tue Jan 09, 2007 1:21 am Post subject: |
|
| You don't look for dry joints nomaly they are hard to see, you actually have to get youself a solder tool, and just resolder everything in the power sup, is that if you know what you doing,goog luck. |
|
|
| willuk82 |
| Posted: Mon Jan 08, 2007 11:16 pm Post subject: |
|
thanks for the replies, my brother moved this tv upstairs, then the picture would come and go with giving it a whack, very technical i know  , time i got around to looking for the dry joint he said, he smelt a burning smell from it and frame collapse ever since, i couldnt see anything obvious thas burnt up.
Shed any more light?
Cheers Will |
|
|
| allanm |
| Posted: Mon Jan 08, 2007 6:41 pm Post subject: |
|
| Could be a dry joint on the scan coil plug at the PCB end |
|
|
| Frank |
| Posted: Sun Jan 07, 2007 10:35 pm Post subject: |
|
| Check Caps. and IC, in the vertical circuit, |
|
|
| willuk82 |
| Posted: Sun Jan 07, 2007 10:05 pm Post subject: ak19 frame collapse? |
|
Hi, i have a bush 2572NTXSIL, ak19 television. which has a horizontal white line, had a search but cant see any past posts relating to this fault.
any advice would be greatly appreciated
Cheers Will  |
|
|