Author Message
PostPosted: Thu Jan 18, 2007 10:27 am    Post subject:

What has been happening is i had a tiny celeron d setup that i had cheap, after a few weeks it died so i put in an athalon x2 system replacing the power supply and everything else in the case.

After 3 weeks it was dead, so i sent the board back to the supplier and they confirmed it was dead and sent a new one.

With the new board in the machine it was working again but again after a few days it started playing up just after i got the power switch in the front of the case stuck it jams. I have since replaced the case with a new one and dont seem to have had any more problems.
PostPosted: Thu Jan 18, 2007 1:47 am    Post subject:

I think it could what's happening with the boards are they dead or stopping during bios post. The reason i think a power button on an ATX system could damage motherboards is i have had a few board myself fail, these were new boards AM2.

PostPosted: Wed Jan 17, 2007 11:30 am    Post subject:

I don't think so.

Have you tried CRC?
PostPosted: Sun Jan 14, 2007 1:49 pm    Post subject: Power Switch

Just a little advice, i have a machine and now and again the power button on the front of the case sticks in, can this damage motherboards?

Powered by phpBB © 2001,2002 phpBB Group