Electronic equipment repair and service manual search discussion :: Topic review

cory · Posted: Sat Feb 17, 2007 5:41 pm Post subject:

the capacitor is 22/50v, but you will need to replace 2 convergence ics(stk394-040) and check all 3.9 ohm resistors.

minnie · Posted: Mon Feb 05, 2007 10:40 pm Post subject:

//www.eserviceinfo.com/downloadsm/3731/Samsung_SP47W3HF1X/BOB.html

They have the schematic here. Download it. It's not a US model so I don't have access to it. Or can I figure out how to download and open from here!

minnie · Posted: Sat Feb 03, 2007 5:22 pm Post subject:

PM me w/the model again. I'll be out of town but I'll look it up when I get back.

BERTBOY · Posted: Fri Feb 02, 2007 5:56 pm Post subject:

the model number is SP42W4HBX. THE NEXT PROBLEM I HAVE IS GETTING THE VALUE OF THE CAPACITOR. THE ONLY THING I HAVE TO GO ON IS THE CODE BESIDE IT ON THE BOARD AND IT IS CZ140 CAN ANYBODY PLEASE HELP[/b][/url][/u]

minnie · Posted: Thu Feb 01, 2007 11:43 pm Post subject:

Whats the model #.

Frank · Posted: Thu Feb 01, 2007 11:24 pm Post subject:

Replace with same value in ufs and also same volts and check all resistors.

BERTBOY · Posted: Thu Feb 01, 2007 6:30 pm Post subject: SAMSUNG REAR PROJECTION HELP

A CAPACITOR HAS BLOWN ON THE CONVERGENCE BOARD IS IT POSSIBLE TO REPLACE IT WITH ONE OF EQUAL VALUE OR DO I NEED TO REPLACE THE WHOLE BOARD. HELP WOULD BE APPRECIATED