Author |
Message |
je-rex |
Posted: Mon Feb 26, 2007 6:28 am Post subject: PANASONIC SA-AK600 Mini HiFi |
|
Thanks tsgunnell. I have gone thru' that. If you are familiar with the cct of this unit (no disrespect) - the ac transformer cct is not being activated 'coz there is nothing coming from the uP to activate the relay (via a switching tranny). VCC and VREF of uP is OK. Have also replaced uP and also I/O Expander ic's - still no go! The o/p from the uP that is required is identified as 'Pcont' to activate the ac cct relay, is not there ....am still crossing my fingers ! |
|
 |
tsgunnell |
Posted: Mon Feb 26, 2007 5:50 am Post subject: |
|
if it was partly working before replacing chip double check for solder bridges and splashes this is a situation that as happened to all of us at some time |
|
 |
[email protected] |
Posted: Sun Feb 25, 2007 11:49 pm Post subject: Panasonic SA-AK600 Mini HiFi |
|
I need help! I replaced the audio ic RSN311W64B-P due to audio output (centre out) speaker fault. I now find the unit not powering up. It is on permanent standby mode - No i/p or o/p connections ... any suggestions..? |
|
 |