| Author |
Message |
| fwilliams |
 Posted: Wed Apr 04, 2007 1:05 pm Post subject: sony kv-fs120 be-6 chassis |
|
horiz freq is normal, not sure what q002 is for. it's labled convergence and
traces back to pin 63 on the jungle ic. |
|
 |
| cory |
| Posted: Mon Apr 02, 2007 10:27 pm Post subject: |
|
| this model has a big problem when first turned on with horizontal frequecy going off.if this is what you mean you could replace m board,or if you can replace ic on m board(jungle). |
|
|
| Frank |
| Posted: Mon Apr 02, 2007 9:56 pm Post subject: |
|
| Are you an electronic tech? if so give more detailed info. on what you've tested so far.If not give a simple description of your problem if possivle send a pic,but don't talk tech. stuff. |
|
|
| fwilliams |
| Posted: Mon Apr 02, 2007 1:39 pm Post subject: sony kv-fs120 be-6 chassis |
|
| horizontal convergence is off. will not adjust with the stat control. swapped out crt board with no difference. seems to be an electronic problem as it is off equally all the way up and down. the vertical convegence is fine. |
|
|