Author |
Message |
minnie |
Posted: Sat Jun 30, 2007 7:30 pm Post subject: |
|
Other common failures Q912,Q913,I901. |
|
|
kuhurdler |
Posted: Sat Jun 30, 2007 2:28 pm Post subject: |
|
those +/- 27V power supplies feed the convergence circuit. You probably need to replace your convergence STKs |
|
|
mustang_52 |
Posted: Fri Jun 22, 2007 6:55 pm Post subject: |
|
F903 is good. now what? The other fuses appear good too. |
|
|
mustang_52 |
Posted: Thu Jun 21, 2007 12:42 am Post subject: |
|
minnie wrote: | Check F903 and see if it's open. | sorry, ive been away from electronics class a long time. how do I do that? |
|
|
minnie |
Posted: Wed Jun 20, 2007 10:52 pm Post subject: |
|
Check F903 and see if it's open. |
|
|
mustang_52 |
Posted: Wed Jun 20, 2007 9:52 pm Post subject: |
|
ok, i observed the 5 green leds when i plug the tv in and this is what happends. They all come on right away, then the +27 and -27 leds go off first at the same time. The rest of the leds follow. Does this help out? |
|
|
Guest |
Posted: Wed Jun 20, 2007 12:00 am Post subject: Hitachi 60sx12b power problem |
|
Ive got a 60sx12b that when i puch the power button it turns on then off right away. Ive looked in the back and i remember seeing leds light up then turn off. Any suggestions where to start? |
|
|