 Posted: Thu Sep 20, 2007 6:20 pm Post subject: Same problem with my NV-HV60 |
|
| Hi,
I´m german and I´m happy that you have such a good forum for electronic repair topics. This is missing in germany. Ok, as I said. I had the same problem as makanay. My VCR was dead. After changing the capacitor c1260 I have now display ready. Everything seemed to be good. Then I tried to put a cassette in but the VCR, which should take it automatically, did nothing. What can be the reason. A mechanical or a electronic one? I think there must be a switch which must be pressed to activate the automatic feeder. What do you mean? regards, Klaus |
|
| Posted: Thu Aug 02, 2007 1:43 pm Post subject: |
|||
dear gary .... u r brilliant i found the capacitor u mentioned is broken with some rust on it ... so now i am gonna change it .... thanks alot buddy |
|||
| Posted: Thu Aug 02, 2007 11:21 am Post subject: |
|
| psu is power supply unit, yes it is a capacitor, i know this is most likely the problem as it causes 99.9% of the apparently dead panasonic vcrs i see for repair, to be absolutely sure you could check for ripple on the unswitched 6v supply with an oscilloscope but replacement is so easy you would be better just doing it, the reason i am pretty sure it is this is i work in a panasonic authorised digital service centre. | |
| Posted: Thu Aug 02, 2007 10:56 am Post subject: |
|||
could u be more specific .... this is my 1st time trying to fix a device .... what i understood is that it's a capacitor , 1000 micro farad , 10 v , is that right ? if yes how did u know that this is the problem ? also what is psu ? |
|||
| Posted: Thu Aug 02, 2007 8:06 am Post subject: |
|
| replace c1260 in psu section, 1000mfd 10v | |
| Posted: Wed Aug 01, 2007 11:55 pm Post subject: |
|
| it's an (NV-HV60) | |
| Posted: Wed Aug 01, 2007 11:06 pm Post subject: |
|
| It just might help if you posted the model number. | |
| Posted: Wed Aug 01, 2007 10:34 pm Post subject: panasonic VCR gone dead |
|
| hi ,
suddenly my panasonic video cassette recorder ceases to be alive .... it doesnt power on what could be the problem ? |
|