 Posted: Tue Aug 03, 2010 5:25 am Post subject: |
|
| .15 Silver
1.5 Gold 15 Black 150 Brown 1.5K Red 15K Orange 150K Yellow 1.5Meg Green 15Meg Blue Start at the bottom and work upward. Each step upward is obviously a times ten decrease in resistance. If this resistor is the LAST (only) defective part, the set will start trying to work when you get close. Wouldn't reporting the location number that's silk-screened on the PCB near this resistor have been easier?  |
|
| Posted: Tue Aug 03, 2010 1:06 am Post subject: burnt resistor |
|
| My Philips TV 21pt3324/71 shut down aftewr a lightning storm in our area. I found a burnt resistor beyond recognition at the power supply section. I appreciate if somebody could identify it for me. The resistor is color coded with brown, green and ? and gold. | |
| Posted: Tue Jul 15, 2008 7:04 pm Post subject: |
|
| try adjusting the screen voltage on lopt.try very little at a time. had similar problem on L01.1A AC chassis. hope this helps to turn tv on at least. | |
| Posted: Mon Sep 10, 2007 3:13 am Post subject: L01.2A Chassis Shutdown |
|
| If someone has experienced this fault before, kindly help. Thanks in advanced.
Philips 21PT3324 TV set comes on then picture and sound shutdown after few seconds. H.O.T. voltages are C= 35Vdc; E=18Vdc; Vdc= 18 I have tried to replace the controller IC(TEA1507) of the MosFET because output is only .086Vdc, diagram says it should be 2Vdc. other components in power supply has been checked, no problem. I'm still working on this set, alloted 1 hour per day of doing the repair.  |
|