Author |
Message |
[email protected] |
Posted: Mon Sep 14, 2009 7:43 am Post subject: Re: LG PDP 42V5 Partnumber: 3501V00148A APS-197 |
|
REM: Postals are NOT included |
|
|
[email protected] |
Posted: Mon Sep 14, 2009 7:41 am Post subject: LG PDP 42V5 Partnumber: 3501V00148A APS-197 |
|
I have the fully functionable powersupplyboard, Partnumber: 3501V00148A APS-197 and plasmapanel, "same tv-set" for sale!! Give bid to [email protected] Pay to Paypal: [email protected] |
|
|
Guest |
Posted: Mon Sep 14, 2009 7:34 am Post subject: |
|
bitje wrote: | Wither more looking i see the 190 volt is missing by power on it com up but only thil a 15 volt and then it falls down,..... Nobody ??? Greetz Bitje | bitje wrote: | ""190 volt is missing by power""
| quote wrote: | Check the condensators on the powersupply board, the most time, they are dryed out and will not work!
| Again!!!!!!! Check the condensators on the powersupply board, the most time, they are dryed out and will not work! most condesators on highpotside is 1000 uf, but may be the 420 and 220 uf dryed out as well! If it is 25 volts, swap with 50 volts, AND, swap with conensators for about 150 degrees celsius! Or more! Cause the temparature on condensators, is why it dryes out! Regards: Datateknikk telecom Norway! |
|
|
Guest |
Posted: Mon Sep 14, 2009 7:27 am Post subject: Re: BlueSky (LG) i think PDP 42V5 |
|
bitje wrote: | The problem of this screen is no picture and sound at all, power led on the front go on and stay green. On the power supply board the relai clicks and the led on the board go on and of every 6 times.... Help help screen is from 2003-10 | Check the condensators on the powersupply board, the most time, they are dryed out and will not work! most condesators on highpotside is 1000 uf, but may be the 420 and 220 uf dryed out as well! If it is 25 volts, swap with 50 volts, AND, swap with conensators for about 150 degrees celsius! Or more! Cause the temparature on condensators, is why it dryes out! Regards: Datateknikk telecom Norway! |
|
|
bricolux |
Posted: Wed May 10, 2006 4:59 am Post subject: |
|
Got the same problem too after only 2 years of service. looks like the power supply board is detecting a failure (on the 190V?) and is switching off the relais for safety, and flashes 6 times as the code for the error. Can anyone help, has the service manual, schematics and/or the error code list? For the ones who experienced the same failure, how did you resolve it? many thanks in advance. |
|
|
satwolf |
Posted: Fri Feb 10, 2006 4:11 am Post subject: |
|
Dit you found the error on your TV set, i have got exacly the same problem. Satwolf |
|
|
bitje |
Posted: Sat Mar 05, 2005 4:48 pm Post subject: |
|
Wither more looking i see the 190 volt is missing by power on it com up but only thil a 15 volt and then it falls down,..... Nobody ??? Greetz Bitje |
|
|
bitje |
Posted: Tue Mar 01, 2005 9:08 pm Post subject: BlueSky (LG) i think PDP 42V5 |
|
The problem of this screen is no picture and sound at all, power led on the front go on and stay green. On the power supply board the relai clicks and the led on the board go on and of every 6 times.... Help help screen is from 2003-10 |
|
|