| Author |
Message |
| Guest |
 Posted: Sat Oct 27, 2007 5:37 am Post subject: |
|
| what do u mean by ''if the set still works beside the arcing flyback'' |
|
 |
| minnie |
| Posted: Thu Oct 25, 2007 9:32 pm Post subject: |
|
What??? |
|
|
| Guest |
| Posted: Thu Oct 25, 2007 6:55 pm Post subject: |
|
| Help |
|
|
| Guest |
| Posted: Thu Oct 18, 2007 6:21 pm Post subject: |
|
| what do u mean by ''if the set still works beside the arcing flyback'' |
|
|
| vtech |
| Posted: Sat Oct 13, 2007 2:53 pm Post subject: |
|
| No way to determine the future, but if the set still works beside the arcing flyback, there should be no other problem. |
|
|
| Desu |
| Posted: Sat Oct 13, 2007 6:31 am Post subject: |
|
Ok then Thanks u so much for your advice I will change the flyback without trying to coat it , but what other problems could i have ?
Desu |
|
|
| vtech |
| Posted: Sat Oct 13, 2007 4:56 am Post subject: |
|
| No ..when/if the high voltage insulation has broken down, replacement is the only way or you will more than likely damage the horizontal output Txistor(if it hasn't happened already) |
|
|
| tsgunnell |
| Posted: Sat Oct 13, 2007 4:19 am Post subject: |
|
| No nothing will seal in the high voltages i have tried large coatings of araldite (epoxy resin)but the voltage will punch through quite quickly |
|
|
| Desu |
| Posted: Fri Oct 12, 2007 5:31 pm Post subject: |
|
Can I do something without changing the flyback like trying covering the place which the sparks are coming from ( with glues that fit them ).
& what other problems could i have. |
|
|
| Guest |
| Posted: Fri Oct 12, 2007 4:26 pm Post subject: |
|
| replace the flyback tx |
|
|