| Author |
Message |
| minnie |
 Posted: Tue Nov 13, 2007 11:07 pm Post subject: |
|
| Got it, sent you an email. Did you get it? |
|
 |
| allen_bourque |
| Posted: Tue Nov 13, 2007 2:33 pm Post subject: |
|
| I'm unable to send PM. System won't accept my password. |
|
|
| minnie |
| Posted: Mon Nov 12, 2007 10:55 pm Post subject: |
|
| PM me your email. |
|
|
| allen_bourque |
| Posted: Mon Nov 12, 2007 10:39 pm Post subject: Hitachi 43uwx10b - power light blinking |
|
| Not yet, but I have them on order. Regarding the fuse - I downloaded the service manual and there doesn't appear to be a E994 fuse, so the IC's are my next try. Do you have any troubleshooting advice? I did smell some burnt circuits for a few moments when the TV was turned on (just like the first time the IC's went out). A close-up visual inspection of the PWB deflection board looks fine. I've haven't removed the convergence board, but didn't see anything obvious. |
|
|
| minnie |
| Posted: Mon Nov 12, 2007 9:32 pm Post subject: |
|
| Did you replace the IC's again? |
|
|
| allen_bourque |
| Posted: Mon Nov 12, 2007 3:47 pm Post subject: Hitachi 43uwx10b - power light blinking |
|
| Replaced convergence IC's about 2 years ago. Worked great until yesterday. No lights - only the power light blinking. Another posting suggested C702 capacitor and E994 Pico Fuse. C702 looks fine. Can't find E994 anywhere on board with C702. Based on another posting suspect this is the same problem as last time with convergence IC. Any ideas? [/code] |
|
|