| Author |
Message |
| minnie |
 Posted: Mon Nov 19, 2007 11:07 pm Post subject: |
|
| Take a pencil eraser and clean the contacts on the base and phone. |
|
 |
| Guest |
| Posted: Mon Nov 19, 2007 9:07 pm Post subject: |
|
| yes voltage from base ok |
|
|
| minnie |
| Posted: Sat Nov 17, 2007 9:58 pm Post subject: |
|
| Did you take a meter and see if there's voltage on the base pins? |
|
|
| Mr Basterde |
| Posted: Sat Nov 17, 2007 7:33 am Post subject: Panasonic phone u/s |
|
| generally speaking, these are a specialist repair item- but I have in the past fixed a few by resoldering suspect areas- in this case, check/r/s from the batt up- warning- smd- needs skill- if you don'thave, don't even attempt!. |
|
|
| djp |
| Posted: Thu Nov 15, 2007 11:01 am Post subject: panasonic cordless phone dead? |
|
| and before that happened it used to stop working all of a sudden but come back alive after a 'rest' on the base Now it will not turn on at all(nor talk/batt_low diodes) even with new battery. Here is the 3908 schematic http://geocities.com/anglomont/nb3908.jpg; q15 and q101 seem ok, any ideas? tnx... |
|
|