Author |
Message |
Justmanuals |
|
|
Guest |
Posted: Thu Nov 29, 2007 7:45 pm Post subject: |
|
If I do not have sound, is the fix to still solder the vertical IC? |
|
|
minnie |
Posted: Mon Nov 26, 2007 11:10 pm Post subject: |
|
IC501. |
|
|
Guest |
Posted: Mon Nov 26, 2007 1:17 pm Post subject: |
|
Minnie - Thanks. Where can I find the exact location/procedure to resolder this IC? Your help is appreciated. Thanks... Jeff |
|
|
minnie |
Posted: Mon Nov 26, 2007 4:07 am Post subject: |
|
Resolder the vertical IC. |
|
|
Guest |
Posted: Mon Nov 26, 2007 2:15 am Post subject: |
|
THanks to both whom replyed... I do have sound. Also, the on/off clicking goes away when I disconnect the TV antenna coax. Unfortunately, if this was a car, I would not have any issues, so I have absolutley no clue when it comes to ICxxx....) |
|
|
Guest |
Posted: Sun Nov 25, 2007 11:55 pm Post subject: |
|
Do you have sound? |
|
|
Guest |
Posted: Sun Nov 25, 2007 11:32 pm Post subject: Re: Sony KV-32XBR45 - No Picture and clicking on/off |
|
Anonymous wrote: | Hello and Happy Thanksgiving....I am a nubee so I hope someone can help I have a an approx 11 year old Sony KV-32XBR45. Approx two months ago, the picture went completely out. Initially, when the picture went out and the TV was turned on, I could hear the power supply (?) click on, then immediately click off again. It would repeat this cycle until I physically shut the TV off. TV has been pretty much unplugged since this happened, but I thought to try again today. Plugged the TV back in, now I still hear it click on, however the clicking on/off does not occur - still no picture. I saw a similar post and tried the “display, #5 and power up” from the remote, but this did nothing. I do not see any blinking lights, so not sure where/what to do next. Your help is appreciated.... Jeff | Your flyback may be bad,also look up ic651,c613,c652,c654. |
|
|
Guest |
Posted: Sat Nov 24, 2007 7:17 pm Post subject: Sony KV-32XBR45 - No Picture and clicking on/off |
|
Hello and Happy Thanksgiving....I am a nubee so I hope someone can help I have a an approx 11 year old Sony KV-32XBR45. Approx two months ago, the picture went completely out. Initially, when the picture went out and the TV was turned on, I could hear the power supply (?) click on, then immediately click off again. It would repeat this cycle until I physically shut the TV off. TV has been pretty much unplugged since this happened, but I thought to try again today. Plugged the TV back in, now I still hear it click on, however the clicking on/off does not occur - still no picture. I saw a similar post and tried the “display, #5 and power up” from the remote, but this did nothing. I do not see any blinking lights, so not sure where/what to do next. Your help is appreciated.... Jeff |
|
|