 Posted: Mon Jan 14, 2008 12:02 pm Post subject: |
|
| Good. We would have come to that. | |
| Posted: Mon Jan 14, 2008 12:43 am Post subject: |
|
| found it....
cracked solder joint on the side phototransistor. Thanks again for your help... |
|
| Posted: Sun Jan 13, 2008 10:24 pm Post subject: |
|
| Unless it is a very old model it will be the mode switch. Otherwise a visable leaf switch at the top of the deck. | |
| Posted: Sun Jan 13, 2008 10:07 pm Post subject: |
|
| hi
Do you know what determines when the motor should stop? Is it the mode switch or is there a switch or sensor...? Thanks |
|
| Posted: Sun Jan 13, 2008 8:58 pm Post subject: |
|
| Yes, a set of belts can be bought quite cheaply. | |
| Posted: Sun Jan 13, 2008 8:26 pm Post subject: |
|
| Are you refering to the load motor belt?
Thanks |
|
| Posted: Sun Jan 13, 2008 8:20 pm Post subject: |
|
| This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
|
| Posted: Sun Jan 13, 2008 7:21 pm Post subject: |
|
| I haven't the manual for your particular set. Be it could easyly be a widened belt. | |
| Posted: Sun Jan 13, 2008 5:25 pm Post subject: JVC VCR eject problems |
|
| HI
I have a JVC HR-s9800u The eject motor keeps running for 10 seconds after the tape ejects. Then the unit shuts down. I really want to fix this thing, as its a nice unit. Thanks in advance. |
|