Author |
Message |
pawluf |
Posted: Mon Jan 14, 2008 12:02 pm Post subject: |
|
Good. We would have come to that. |
|
|
Guest |
Posted: Mon Jan 14, 2008 12:43 am Post subject: |
|
found it.... cracked solder joint on the side phototransistor. Thanks again for your help... |
|
|
pawluf |
Posted: Sun Jan 13, 2008 10:24 pm Post subject: |
|
Unless it is a very old model it will be the mode switch. Otherwise a visable leaf switch at the top of the deck. |
|
|
Guest |
Posted: Sun Jan 13, 2008 10:07 pm Post subject: |
|
hi Do you know what determines when the motor should stop? Is it the mode switch or is there a switch or sensor...? Thanks |
|
|
pawluf |
Posted: Sun Jan 13, 2008 8:58 pm Post subject: |
|
Yes, a set of belts can be bought quite cheaply. |
|
|
Guest |
Posted: Sun Jan 13, 2008 8:26 pm Post subject: |
|
Are you refering to the load motor belt? Thanks |
|
|
Justmanuals |
|
|
pawluf |
Posted: Sun Jan 13, 2008 7:21 pm Post subject: |
|
I haven't the manual for your particular set. Be it could easyly be a widened belt. |
|
|
Guest |
Posted: Sun Jan 13, 2008 5:25 pm Post subject: JVC VCR eject problems |
|
HI I have a JVC HR-s9800u The eject motor keeps running for 10 seconds after the tape ejects. Then the unit shuts down. I really want to fix this thing, as its a nice unit. Thanks in advance. |
|
|