Author |
Message |
minnie |
Posted: Fri Dec 12, 2008 12:00 am Post subject: |
|
Q777 and Q701 come to mind. |
|
|
kp06 |
Posted: Thu Dec 11, 2008 3:50 am Post subject: |
|
Where is that located?(I dont have the TV or Manual where im at) |
|
|
minnie |
Posted: Wed Dec 10, 2008 10:25 pm Post subject: |
|
This is known for the horizontal output transistor shorting. |
|
|
kp06 |
Posted: Wed Dec 10, 2008 8:36 pm Post subject: |
|
Yeah I am getting a strange voltage there too. Something like 56 volts. did you ever figure it out? |
|
|
Guest |
Posted: Thu Mar 20, 2008 7:25 am Post subject: |
|
I to have the same problem. Replaced the convergence IC's and still same problem. The set will not power on. I get the relay clicks and all the led's come on but it makes a whine sound over and over like its trying to start but never comes on. I dont know that is making the high pitched sound but when I touch leg 1 of STR-F6629B with the volt meter the tone of the sound changes. I am going to try replacing that next. Checking voltages on the other Regulators Q777 I get 58 volts on the 2 outer legs. So something is not right. |
|
|
Guest |
Posted: Mon Mar 17, 2008 10:33 pm Post subject: |
|
Convergence IC's will cause a dead set. |
|
|
kp06 |
Posted: Mon Mar 17, 2008 4:55 am Post subject: |
|
The resistors check out good I think it has to do with the power supply. |
|
|
minnie |
Posted: Sun Mar 02, 2008 6:53 pm Post subject: |
|
I'd replace the convergence IC's and check the resistors next. |
|
|
Guest |
Posted: Sun Mar 02, 2008 5:31 pm Post subject: |
|
yeah it checks out good. |
|
|
minnie |
Posted: Fri Feb 29, 2008 7:15 pm Post subject: |
|
Did you check pico fuse EP 91? |
|
|