| Author |
Message |
| Tripperjoe |
 Posted: Thu May 08, 2008 3:00 am Post subject: Had the same problem |
|
| I didnt even try to diagnose the problem. I just found the listed parts at a local shop and changed then. The kids only missed a few hours of cartoons that day. My wife didnt even miss American Idol. Thanks for the information. I am now looking for other TV's to fix. Also, if you are local to Orange County CA and need the parts, i have extra. I had to buy 5 of each. It still only cost about $10 total. If your local and need parts i will give them to you. My email is [email protected] |
|
 |
| senator91 |
| Posted: Sat Mar 29, 2008 6:44 pm Post subject: |
|
| Just to post an update. All is well. Was able to get the parts off a scrapped TV from a local repair store(at no cost), installed the parts, and watching TV again. I appreciate the the information available from this site. Thanks. |
|
|
| minnie |
| Posted: Thu Mar 27, 2008 11:15 pm Post subject: |
|
2 amp pico
1000 pf-k 2kv
Per SM. |
|
|
| Guest |
| Posted: Thu Mar 27, 2008 10:48 pm Post subject: |
|
| Are you sure on those specs? I'd heard elsewhere that the cap was 100uF @63v. and the fuse was 2A. Can anyone confirm because I'm going to have to match them up. Thanks. |
|
|
| Guest |
| Posted: Thu Mar 27, 2008 9:52 pm Post subject: |
|
| 5 amp pico fuse and a 1000 pf 2KV Cap. |
|
|
| senator91 |
| Posted: Wed Mar 26, 2008 11:10 pm Post subject: |
|
I read through that post, and think that's probably the the same thing I'm experiencing. I checked the C707,but no visible indication of a problem. Would you suggest replacing these two parts and see where I stand? Also, do you know a good place to order them from?
The burning smell seems to located closer to the E994, actually a little left of it, as opposed to near the C707. Does that mean or indicate anything? |
|
|
| minnie |
|
|
| minnie |
| Posted: Wed Mar 26, 2008 10:36 pm Post subject: |
|
| senator91 wrote: |
| Hi. I just checked the E994 and it is open. Is it possible to bypass this fuse temporarily for test purposes? |
If the fuse is bypasses you'll fry your power supply. Look for C707 and look for the black hole in it. |
|
|
| senator91 |
| Posted: Wed Mar 26, 2008 7:26 pm Post subject: |
|
| Hi. I just checked the E994 and it is open. Is it possible to bypass this fuse temporarily for test purposes? |
|
|
| minnie |
| Posted: Wed Mar 26, 2008 7:20 pm Post subject: |
|
| Check to see if E994 is open is the first place to start. |
|
|