| Author |
Message |
| bigbadwolf2009 |
 Posted: Wed Jun 06, 2012 4:15 pm Post subject: Re: sl-l20 turntable problem |
|
| Anonymous wrote: | | bigbadwolf2009 wrote: | Hi this is John I have the service manual and it doesn't show what kind of grease to put on the guide rail but it shows the grease that goes on the gears
which I have. I called panasonic and they were no help. All I know is that the grease I need is light brown in color but I need a part number so I can order it from pansonic. Thanks! |
Do you know where I can get the service manual for the SL-L20? |
Hi this is John I do have a copy of the service manual, do you have a problem with your turntable? If your turntable doesn't track properly I
would replace the small tonearm belt and I'm pretty sure the grease has
dried out just like mine did. I just found out what kind of grease panasonic
used on the tonearm guide rod, it is silicone grease. But I still never figured
out what they used on the guide rail base.Hope that helps! |
|
 |
| Guest |
| Posted: Thu May 17, 2012 1:56 pm Post subject: Re: sl-l20 turntable problem |
|
| bigbadwolf2009 wrote: | Hi this is John I have the service manual and it doesn't show what kind of grease to put on the guide rail but it shows the grease that goes on the gears
which I have. I called panasonic and they were no help. All I know is that the grease I need is light brown in color but I need a part number so I can order it from pansonic. Thanks! |
Do you know where I can get the service manual for the SL-L20? |
|
|
| bigbadwolf2009 |
| Posted: Tue Apr 08, 2008 4:46 pm Post subject: sl-l20 turntable problem |
|
| I've tried phonolube but it's only for gears and not for sliding surfaces. The grease I need has to be a slightly tacky grease. I believe it's the same kind of grease they use on cassette boomboxes which make the door open slowly. |
|
|
| vtech |
| Posted: Mon Apr 07, 2008 4:19 am Post subject: |
|
| You don't need a panasonic grease...search for "phonolube" which is more than adequate in your application.--make sure to clean out the old grease first. isopro. alcohol does a good job in cleaning out the dried-up grease. |
|
|
| bigbadwolf2009 |
| Posted: Sun Apr 06, 2008 4:03 pm Post subject: sl-l20 turntable problem |
|
Hi this is John I have the service manual and it doesn't show what kind of grease to put on the guide rail but it shows the grease that goes on the gears
which I have. I called panasonic and they were no help. All I know is that the grease I need is light brown in color but I need a part number so I can order it from pansonic. Thanks! |
|
|
| Justmanuals |
| Posted: Sun Apr 06, 2008 3:13 pm Post subject: |
|
Well, did you ever think of wiping off the old grease and putting some new grease on?
[email protected] |
|
|
| bigbadwolf2009 |
| Posted: Sun Apr 06, 2008 4:19 am Post subject: technics sl-l20 turntable problem |
|
| Hello I hope someone can help me I have a problem with my technics sl-l20 linear tracking turntable. The problem is that the tonearm cues down too fast and the grease on the guid rail is dried up. Thank you I appreciate your help. |
|
|