 Posted: Tue Apr 22, 2008 9:27 pm Post subject: |
|
| Check Q8038 on the D board to see if it's shorted. (Horizontal output transistor) | |
| Posted: Tue Apr 22, 2008 12:03 am Post subject: SONY KP-51WS500 is Dead ( Need Possible Faults ) |
|
| SONY KP-51WS500 is Dead ( Need Possible Faults )
For KP-51WS500 or KP-57WS500 or KP-65WS500 or RA6 Chassis Not getting any Blinking Codes or Steady lights at all. I tried searching for possibles faults for the "Dead" condition with no luck. I read in the Service Manual that the G-Board could be the problem. I checked the G-Board but could not find any problems with it. The G-Board has the proper 5 VDC Standby Voltage at CN-5001 Pin 1. Any information you may have would be appreciated. Thanks |
|