 Posted: Thu Jan 04, 2007 11:01 pm Post subject: |
|
| lads, sorry for the delay in my response. I installed a red elasic band and it did the trick for about 6 months. and i'm in the same boat now. lol. oh well it was cheap and it worked for a bit. the belt i need is square 1.2x1.2mm and 36cm long the above mentioned website has the belt, but they want 20euros for shipping. lol That's just nuts. i live in toronto canada by the way. Greg |
|
| Posted: Wed Apr 19, 2006 5:52 pm Post subject: |
|
| Is it a flat belt or a square section belt? What country are you in? How long does the belt measure? What does the belts cross section or thickness measure? Do you have Dick Smith stores ot Tandy stores? Let us know how you go.  |
|
| Posted: Wed Apr 19, 2006 5:33 pm Post subject: |
|
| Try this Website www.Donberg.ie | |
| Posted: Wed Apr 19, 2006 4:56 am Post subject: |
|
| i've check 4 electonic shops w/ no luck. I've also called up blaupunkt and they don't stock the part anylonger greg |
|
| Posted: Sat Apr 15, 2006 4:55 pm Post subject: |
|
| Most, if not all electronics shops have an assortment of belts. Take your old belt, including all of the pieces into one of these and match it up. It is the length of the broken belt that will help you determine the size that the new belt should be. |
|
| Posted: Sat Apr 15, 2006 12:05 am Post subject: |
|
| I've figured it out, the belt that powers the tape has snapped. Now to find out a source for these things Greg |
|
| Posted: Wed Apr 12, 2006 2:42 am Post subject: tape deck |
|
| in het midden tussen de schpeolschotels zit een tussen wiel met spiegeltjes op die pulsen genereerd op een optocoupler . spiegeltjes NIET MET ALCOHOL ENKEL WATER EN ZEEP zachtjes met oorstokje kuisen . indien niet helpt is de hybride op loopwerkprint stuk en is het toestel voor de schroothoop :niet meer leverbaar. |
|
| Posted: Mon Apr 03, 2006 11:26 pm Post subject: |
|
| hello, did you get to the bottom of this problem? my tape deckdoes the same exact problem Greg |
|
| Posted: Sun Apr 17, 2005 8:40 pm Post subject: |
|
| also if you have children make sure that they have not pushed foreign objects into opening you be surprised at things that end up in elertrical equipment | |
| Posted: Sun Apr 17, 2005 8:38 pm Post subject: |
|
| probably the belt is not turning the reels of the tape when you put tape in it thinks that the tape is at the end switches to the other side and thinks the tape as ended then switches off .so most likely the belt or mechanism is jammed | |