| Author |
Message |
| skytec |
 Posted: Fri Jun 27, 2008 2:41 pm Post subject: toshiba |
|
| The 200v line is ok so I've ordered a frame I/C. (It's cheap enough to try on spec). Thanks Minnie |
|
 |
| minnie |
| Posted: Fri Jun 13, 2008 4:03 pm Post subject: |
|
| Sounds like you're missing the 200 volts to the crt sockets or a bad vertical IC. |
|
|
| skytec |
| Posted: Fri Jun 13, 2008 10:11 am Post subject: toshiba projection |
|
| Now by white line do you mean frame collapse? No it dosen't. It does have visible flyback lines though |
|
|
| minnie |
| Posted: Wed Jun 11, 2008 11:10 pm Post subject: |
|
| If you look into the picture tubes do you see a straight line in the middle? |
|
|
| skytec |
| Posted: Wed Jun 11, 2008 11:04 am Post subject: toshiba projection |
|
| minnie wrote: |
| If you push menu does anything show? |
No, none of the controls have any response and the standby led is red |
|
|
| minnie |
| Posted: Mon Jun 09, 2008 8:10 pm Post subject: |
|
| If you push menu does anything show? |
|
|
| skytec |
| Posted: Mon Jun 09, 2008 9:57 am Post subject: Re: toshiba 42 pw 23p |
|
| minnie wrote: |
| skytec wrote: |
| I have a problem with a Toshiba 42PW23P rear projection tv. After the receiver had been left off for a month it now wont come out of standby. The LOP stage is working and the cameras are illuminated...any ideas guys? |
Now what are you referring to when you say receiver? The cameras I'm assuming you mean the three picture tubes? |
By receiver I mean the projection unit itself and by cameras I do mean the 3 picture tubes |
|
|
| minnie |
| Posted: Fri Jun 06, 2008 9:37 pm Post subject: Re: toshiba 42 pw 23p |
|
| skytec wrote: |
| I have a problem with a Toshiba 42PW23P rear projection tv. After the receiver had been left off for a month it now wont come out of standby. The LOP stage is working and the cameras are illuminated...any ideas guys? |
Now what are you referring to when you say receiver? The cameras I'm assuming you mean the three picture tubes? |
|
|
| skytec |
| Posted: Fri Jun 06, 2008 3:09 pm Post subject: toshiba 42 pw 23p |
|
| I have a problem with a Toshiba 42PW23P rear projection tv. After the receiver had been left off for a month it now wont come out of standby. The LOP stage is working and the cameras are illuminated...any ideas guys? |
|
|