 Posted: Sun Oct 10, 2010 6:39 pm Post subject: Protection mode and fan not running |
|
| Measured the voltage at the molex plug for the fan. Reading only 0.3 volts( should be 12 volts)
Any ideals? |
|
| Posted: Tue Jun 17, 2008 12:26 pm Post subject: |
|
| Hi,
I already have the service manual and parts list, i'm just having trouble tracking down the fault. Cheers |
|
| Posted: Sat Jun 14, 2008 1:18 am Post subject: |
|
| This Parts & Service manual can now be purchased for $9.99 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
|
| Posted: Fri Jun 13, 2008 10:02 pm Post subject: Samsung HT-X30/X40 Home Cinema System - Stuck in standby |
|
| Hi All,
Just joined and this is my first post on this excellent site...! Well here goes, I have the above home cinema system and I can't get it to stay out of standby. It powers up for 10 seconds and then powers down, no display is lit during the 10 seconds and the fan does not kick in at all, all it does do is power on for the 10 seconds and then off again. Can anyone help....! Thanks for looking...! |
|