| Author |
Message |
| diehrd |
 Posted: Wed Jul 02, 2008 12:35 am Post subject: |
|
I AM THE GUEST POSTER .. oops lol..
It is a D52W20 model w/ a ITC222 chassis |
|
 |
| Guest |
| Posted: Wed Jul 02, 2008 12:33 am Post subject: |
|
TV does not stay on ,, it cycles 3 times never giving me a picture , on .. off,.,on ,,, off...on...off..
Model and chassis
It is a D52W20 model w/ a ITC222 chassis |
|
|
| Dantheman |
| Posted: Wed Jun 25, 2008 6:59 am Post subject: |
|
| if TV stays ON after 3 tries then The HV bleeder is OK Change CP150 2200UF/16V CP114 220UF/35V CP120UF/35V |
|
|
| minnie |
| Posted: Mon Jun 23, 2008 8:31 pm Post subject: |
|
| What is the complete model # along with chassis? |
|
|
| Guest |
| Posted: Mon Jun 23, 2008 8:25 pm Post subject: |
|
| Ok thanks .. Any idea where I can order it from ? |
|
|
| minnie |
| Posted: Mon Jun 23, 2008 6:48 pm Post subject: |
|
| The three blink usually ends up being the high voltage splitter that's up front. |
|
|
| diehrd |
| Posted: Mon Jun 23, 2008 2:05 am Post subject: |
|
No... Matter of fact I am a computer guy who decided to try to fix his first TV..
So I would check anything or even replace parts that are suggested ,, |
|
|
| minnie |
| Posted: Wed Jun 18, 2008 3:42 am Post subject: Re: RCA 52" Projection |
|
| diehrd wrote: |
My RCA 52 Inch projection TV has an issue ..
Plug it in , it turns on ,, then off then on then off then on and off ,, and stays off ..
SO 3 cycles , I replaced the fly back .. Per a suggestion from here .. No change still the 3 cycles of on and off .
I know this sequence of on and off is telling me something , does any one have a clue what this on and off 3 times is indicating as the problem ? |
Did you check the horizontal out put transistor to see if it was shorted? |
|
|
| Guest |
| Posted: Tue Jun 17, 2008 11:09 pm Post subject: |
|
| D52W20 |
|
|
| Guest |
| Posted: Tue Jun 17, 2008 8:48 pm Post subject: |
|
| What's the model #? |
|
|