 Posted: Mon Aug 11, 2008 5:38 am Post subject: |
|
| Hi Torbjorn, Thanks for sharing this information. |
|
| Posted: Thu Jul 17, 2008 6:20 am Post subject: |
|
| I will find the pure sine wave since I will use it for a long time. The price is quite significant different between them. Thanks torbjorn. |
|
| Posted: Tue Jul 15, 2008 8:51 am Post subject: |
|
| Hi Torbjorn, Your comments has really helped me. thanks! |
|
| Posted: Mon Jul 14, 2008 12:58 pm Post subject: |
|
| When inverter vendors talk about "modified sine wave", they usually mean a staircase wave. Most motors should be able to run fairly well on a such voltage, perhaps they make somewhat more noise or operate with somewhat lower efficiency than on a pure sine wave. | |
| Posted: Sat Jul 12, 2008 6:05 am Post subject: |
|
| I've look at the inverter that it produces a suitable frequency (50Hz) to the motor. I'm not sure what kind of the motor, maybe a universal one. It doesn't have speed control. It is used to drive some gears making any seed (paper) to be a powder like. one more thing. is the modified sine wave = sine wave? is that ok to drive ac motor? |
|
| Posted: Mon Jul 07, 2008 6:50 am Post subject: |
|
| Usually, it should not be a problem connecting a motor to an inverter. Maybe that particular inverter design has problems with voltage or frequency regulation when connecting a "live" load as a motor with inertia to it, or maybe it cannot supply the high inrush current needed by some kinds of motors. What kind of motor is it? A commutator (universal) motor or an induction motor? Does it have any speed control or soft start facilities? What is the motor to be used for? |
|
| Posted: Mon Jul 07, 2008 2:54 am Post subject: DC to AC inverter for pure sine wave |
|
| thanks for your advice. I've searched at local shop and found out that the inverter can not be used for driving a motor load. why? I'm looking the inverter just because I have an ac motor where I want to give the power from acid battery not from ac power. |
|
| Posted: Mon Jun 30, 2008 8:08 am Post subject: |
|
| Inverters delivering sine wave are fairly cheap today, so i don't think it is a very economic DIY project. A good place for finding schematics is to look at the application notes at some power semiconductor manufacturer's websites. I.e. Fairchild, Intersil, Texas Instruments. |
|
| Posted: Fri Jun 27, 2008 1:10 pm Post subject: DC to AC inverter for pure sine wave |
|
| is anyone can help?... is there any dc to ac converter (12Vdc to 220-240Vac) schema that produces 500W pure sine wave? thanks in advance |
|