| Author |
Message |
| mikmar |
 Posted: Sat Feb 07, 2009 6:19 pm Post subject: |
|
| I have the exact same problem. I inspected the flexie ribbon cables buy found nonburn marks. I beleive the problem is the power supply but have not found Any bad components yet. My set is a 55hdx62. |
|
 |
| minnie |
| Posted: Tue Jul 01, 2008 9:24 pm Post subject: |
|
| Take a moment to carefully observe the COFs Chip on Film. (Left Side black chips mounted on the flexible ribbon cables). Look very closely for burns and/or small holes in these chips. Look very closely for any ribbon cable damage on the connections to the Panel itself from the X and Y SUS. If any defect is seen, the Panel is defective. |
|
|
| pinoyeagle |
| Posted: Tue Jul 01, 2008 5:12 pm Post subject: Hitachi 55HDT79 no display |
|
| I got this Plasma with no display. It turns on and off OK. I checked the 5V, 11V and 90V. The 90V is missing. What could be the problem? |
|
|