 Posted: Tue Sep 05, 2006 2:27 am Post subject: Philips C2082 DAS |
|
| Hi!!!
These monitors, of which I have one myself to recondition, were fitted with a chassis of "FIMI" manufacture and use a single 2SC3996 or 2SC3997 line output transistor and a separate EHT generator box with its own driver/output stage. If you have one of these a replacement LOPT is available from HR Diemen, type HR46118 and the focus unit is listed as being available from Donberg. I have a set of schematics but they are much too large to upload & I've not a large - format scanner I'm afraid!!!! I'm redrawing them to fit on A3/A4 sheets, but this is a long, long project that'll take me many months to complete as yet!!!! As soon as I have conpleted drawings available I'll make 'em availacle!!! Chris Williams |
|
| Posted: Mon Jul 19, 2004 6:45 am Post subject: |
|
| Hi is this monitor with 1 or 3 hot transistors I have schematics for 3 HOT's.
Disconnect HV unit and see if you only get HV fail and no ticking if so suspect FBT AT2090/35. Rich |
|
| Posted: Mon Jul 19, 2004 6:44 am Post subject: Problem with Philips C2082DAS |
|
| I got problem with my Philips C2082DAS monitor.
When I power it, LCD shows FW version and then it informs about testing. After testing LCD starts to show 'Gen. Failure' and sometimes H Sync failure or H&V sync failure. So I opened it and noticed that when I power up, it starts to flash LED in PSU and Magnetometer/Degaus board. Same time, theres ticking sound (tick-tick), wich seems to come from PSU. The part wich seems to be ticking is somesort of coil, there reads DAS. I repaired few cold connections from PSU, didn't helped anything. Who knows, is the problem in mainboard or perhaps in the Horizontal board ? |
|