Author Message
Guest
PostPosted: Wed Nov 26, 2008 9:01 am    Post subject:

can u plz make it clear i mean can u tell me specifically so that i can recognize which IC & resistor simply thanks
elie
PostPosted: Mon Nov 24, 2008 3:24 pm    Post subject: Re: Tv sound ok but picture is collapsed and with lines

Awel wrote:
My Crystal Tv Model CT-2900 , sound is ok but the picture somewhat collapsed & with many lines in it ( flyback lines & also wave kind lines ). it seems come faulty capacitors on the horizontal section, so help plz what could be the problem. what i have to change or check.
.CHANGE THE IC IN SOCKET OR THE RESISTANCE HO GIVE THIS IC 180V TO SOCKET
Guest
PostPosted: Mon Nov 24, 2008 12:51 pm    Post subject:

what parts ( specifically ) then it could be on the horizontal failure u r saying . and also sound is good the whoel screen is blank all the picture is collapsed in one thin vertical line ( from top to bottom )
And also can u plz tell me about the pump up caps& their usually capacity & voltage. waitiing for ur help , thanks
minnie
PostPosted: Sat Nov 22, 2008 8:43 pm    Post subject:

It would be horizontal failure then. Never heard of the brand?
Guest
PostPosted: Sat Nov 22, 2008 7:52 pm    Post subject:

Hi Minnie thanks for the help But the line is not horizontal line it is vertical line ( from top screen to bottom ) the picture is on that thin line on the middle of screen. ? so can that be a failed vertical IC. & what r the pump up caps ? in which area r they found & what is their capacity & voltage most of the time ? the sound is still working good.
waiting for ur help
Guest
PostPosted: Sun Nov 09, 2008 5:30 am    Post subject:

Hi Minnie thanks for the help But the line is not horizontal line it is vertical line ( from top screen to bottom ) the picture is on that thin line on the middle of screen. ? so can that be a failed vertical IC. & what r the pump up caps ? in which area r they found & what is their capacity & voltage most of the time ? the sound is still working good.
waiting for ur help
minnie
PostPosted: Thu Nov 06, 2008 5:55 am    Post subject:

Vertical IC failed because of the pump up caps.
Guest
PostPosted: Thu Nov 06, 2008 5:17 am    Post subject:

yeah, but it is like kind of zigzag or curved ( wave like lines ). & once for a short time the screen was blank & all the picture of the screen was gathered in the middle of the screen in one thin vertical line ( from top to bottom ). So plz can u help me 1. what causes the horizontal curved lines ( all lines on the picture )
2. It went but what could be the problem for that too just to know ( for the screen blank with picture gathered in one vertical line on the middle & that line is from top to bottom ) So plz help me with those 2 , Thanks again
minnie
PostPosted: Mon Nov 03, 2008 10:49 pm    Post subject:

Thinner line in the middle of the set running left to right?
Awel
PostPosted: Mon Nov 03, 2008 8:48 am    Post subject: Tv sound ok but picture is collapsed and with lines

My Crystal Tv Model CT-2900 , sound is ok but the picture somewhat collapsed & with many lines in it ( flyback lines & also wave kind lines ). it seems come faulty capacitors on the horizontal section, so help plz what could be the problem. what i have to change or check.

Powered by phpBB © 2001,2002 phpBB Group