| Author |
Message |
| postman |
 Posted: Fri Jan 09, 2009 7:40 am Post subject: |
|
| minnie wrote: |
| Contact the manufacture for firm ware/driver upgrade. |
As eeprom was stored on two controllers, firmware upgrade which is distributed for public use can upgrade only part of data. Already tried 
Is someone have information about Nikon adjustment software or way how to enter service menu for full reset? |
|
 |
| minnie |
| Posted: Fri Jan 09, 2009 12:20 am Post subject: |
|
| Contact the manufacture for firm ware/driver upgrade. |
|
|
| postman |
| Posted: Thu Jan 08, 2009 2:18 pm Post subject: |
|
[quote="Justmanuals"]This Parts & Service manual can now be purchased for $10.77 and downloaded immediately after payment from http://www.justmanuals.com
In Service manual is described that new card slot can be adapted with Imageadjust software from Nikon. May be there is some other ways how to enter service menu and perform camera reset. |
|
|
| Justmanuals |
|
|
| postman |
| Posted: Thu Jan 08, 2009 9:52 am Post subject: Nikon photo camera help |
|
Hello, can someone help with advice how to alive Nikon D70 camera. CF card slot was changed and now is not recognized by motherboard. Everything is working, no general error messages shown, just pictures is not stored in card. Option "format card" is working, it can clear card, sometimes get message that this card can't be used or picture is not stored. How to reset camera software, reset button on the bottom can't help.
Best regards! |
|
|