Author |
Message |
guest85 |
Posted: Sat Dec 19, 2009 2:17 pm Post subject: |
|
Hi I've been having the same problem with my sharp aquos lc-20S1e. Thanks for this advice, I done exactly whay you said and its got the sound working but the TV is still blank. Do you have any idea what this could be? |
|
|
SDS |
Posted: Tue Nov 03, 2009 3:56 pm Post subject: |
|
Hi. Assuming you have checked and re-soldered or changed SMD ferrites between DC input Jack and on/off switch. The TV shold start in service mode only: Switch-off, plug-in power supply, hold "Menu" and "TV/VCR" keys on TV while switching on. LED turns green screen comes on with a "K" in top left corner. Press simultaneously "Vol-" and "CH-" on TV, go through service mode to clear error buffer, then put to standby. I hope that does the trick... |
|
|
burton77 |
Posted: Thu Feb 05, 2009 8:29 pm Post subject: ive got a sharp lc-20s1e tv its stuck in st/by light flashes |
|
ive got a sharp lc-20s1e tv its stuck in st/by light flashes when remote used but no illumination 12v and 5v supplies both up no fuses o/c can anyone help |
|
|