Author |
Message |
zee |
Posted: Wed Feb 11, 2009 6:25 am Post subject: |
|
I don't know? that's why im asking if the switch would cause that problem? the jumper I put in basically to turn on the tv. isn't the filter cover has a little pin that pushes the switch? otherwise tv won't turn on. so i thought the jumper will work the same way... ( bypass ) |
|
|
Slim |
Posted: Sun Feb 08, 2009 6:08 pm Post subject: |
|
Don't you think you've answered your own question? |
|
|
zee |
Posted: Sun Feb 08, 2009 5:55 pm Post subject: Mitsu WD-62525 |
|
Hi guys, quick question? after replacing all the caps on dm board & p/s board. tv comes on for 1min. then i get message "fan airflow is blocked & will now shut down or shut off" ( something like that ) fan on top of dm board & back of the tv are both working. there's one thing i did by accident. the switch on the side of the tv where the air filter goes broke! so i just put a loop cable wire on the plug to by past it. otherwise tv won't even turn on. by doing this, would that cause the message im getting??? thx! |
|
|