 Posted: Tue Jun 09, 2009 2:02 am Post subject: |
|
| i think you have problem with your graphics card. restart your computer and then before starting to windows press F8 to set your settings to safe mood, after booting up to windows restart the system again.if the problem persist reinstall the software drive of your graphics card if you have it. | |
| Posted: Thu Jun 04, 2009 2:22 pm Post subject: |
|
| Check fuse on LVDS board.
Lvds board is the board placed behind the LCD. see where the data cable goes in to the LCD that's the LVDS board. |
|
| Posted: Fri May 15, 2009 10:58 am Post subject: |
|
| Check for bulged electrolytics on power supply and inverter board(s).
If none, most likely either defective display driver (panel) or Signal/logic board.  |
|
| Posted: Fri May 15, 2009 7:57 am Post subject: HELP! MAG 700P LCD MONITOR ALL WHITE DISPLAY |
|
| my lcd screen just turn into all white display. I know my pc is working coz i did tried other monitor and it's working great. tried adjusting the auto buttons and checking the wire connection for loose connection but stil to no avail. any ideas guys?
I know some electronic troubleshooting so you can share some technical know-how and I could understand where to start the troubleshooting and isolation process.thanks guys. in desperate nid of your help ranz |
|