 Posted: Sat Aug 14, 2010 2:11 am Post subject: Mitsubishi Projection TV |
|
| I have Mitsubishi projection TV VS-4007R. All of the sudden it does not power on. Is there a fuse to replace or reset button. It would be nice to acquir service manual for this TV | |
| Posted: Tue Jun 16, 2009 2:00 am Post subject: |
|
| The speaker grill just pulls off and look at the screen, you'll see the screws and the screen assembly lifts up. | |
| Posted: Mon Jun 15, 2009 1:14 pm Post subject: |
|
| Thanks for the info.
Any idea on the safe way to remove the screen and speaker grills |
|
| Posted: Fri Jun 12, 2009 11:59 pm Post subject: |
|
| Remove the back and see if you can access the three tubes. If not remove the screen and clean off all 3 lenses. The focus block is under the speaker grill. | |
| Posted: Thu Jun 11, 2009 9:33 pm Post subject: Re: How to access service panel on Mitsubishi Projection TV |
|||
Do you have any "clue" what you are doing once you get access? 1990 set - CRT's could be showing their age - especially if you find is already at "best focus." I would highly recommend obtaining service manual and reading fully the convergence proceedures before trying to adjust anything other than the "Customer" convergence. |
|||
| Posted: Thu Jun 11, 2009 4:50 pm Post subject: How to access service panel on Mitsubishi Projection TV |
|
| I have an old Mitsubishi Vs-4001 R . rear projection (1990) TV.
it still has a fair picture on it but could stand focus and convergence touch up. I don't have the service manual so I have no clue how to access the service control panel. If anyone could help or has a copy of the service manual it would be greatly appreciated. Thanks in advance. |
|