| Author |
Message |
| rushman |
 Posted: Sun Jun 28, 2009 6:30 pm Post subject: |
|
thanks minnie ,for the info much appreciated |
|
 |
| minnie |
| Posted: Sun Jun 28, 2009 4:50 pm Post subject: |
|
| Yes |
|
|
| rushman |
| Posted: Sun Jun 28, 2009 4:36 pm Post subject: |
|
| minnie wrote: |
| No. Top of the panel has the LVDS connector going to it. |
the board I have has the HDMI, VGA, and other input plugs the dvd player, game systems connect to, also has a a bunch of wires on a plug(on the other end of the circuit board) labeled LVDS panel interface , is this the board to replace? |
|
|
| minnie |
| Posted: Sun Jun 28, 2009 4:04 am Post subject: |
|
| No. Top of the panel has the LVDS connector going to it. |
|
|
| rushman |
| Posted: Sat Jun 27, 2009 3:51 pm Post subject: |
|
| minnie wrote: |
| Replace the logic board. |
logic board, im assuming that is the board with the hdmi, composite and s-video outputs attached, is that correct? |
|
|
| minnie |
| Posted: Fri Jun 26, 2009 11:15 pm Post subject: |
|
| Replace the logic board. |
|
|
| jts1957 |
| Posted: Fri Jun 26, 2009 7:50 pm Post subject: |
|
Boy, somebodies in a hurry.
Give it a day or three. Somebody will probably respond.
Digistar is not exactly what most would consider "main stream." |
|
|
| Guest |
| Posted: Fri Jun 26, 2009 6:37 pm Post subject: Re: 42" digistar plasma screen |
|
| rushman wrote: |
I have a digistar model 4210D, it takes 5 0r 10 minutes for the screen
to be completely visible (horizontal lines slowly fill the screen) the colors are bad, all the images look like cartoons no matter what display mode I choose, sound is good, the screen is not cracked anywhere. could it be bad caps in the power supply? any help appreciated. ok. I replaced a few larger caps 16v 470 micro and no change. |
would anyone know if this is a power supply problem, or a different board problem? |
|
|
| rushman |
| Posted: Thu Jun 25, 2009 5:43 pm Post subject: 42" digistar plasma screen |
|
I have a digistar model 4210D, it takes 5 0r 10 minutes for the screen
to be completely visible (horizontal lines slowly fill the screen) the colors are bad, all the images look like cartoons no matter what display mode I choose, sound is good, the screen is not cracked anywhere. could it be bad caps in the power supply? any help appreciated. ok. I replaced a few larger caps 16v 470 micro and no change. |
|
|