| Author |
Message |
| PatoPatoGato |
 Posted: Wed Jun 09, 2010 5:26 am Post subject: 42 in Plasma |
|
| The boards are about 85 dollars a piece, I'm real curious if this fixed your tv?? |
|
 |
| minnie |
| Posted: Sun Dec 27, 2009 3:46 am Post subject: |
|
| cosmikj wrote: | i also have this problem. i got this tv for free and was curious how much it would cost to have these replaced, or is this basically just a paperweight now.
also, if anyone could link me to some tech info to read up on this further.
thanks for any info |
Did you try googleing the part numbers for the upper and lower drive boards? |
|
|
| cosmikj |
| Posted: Sat Dec 26, 2009 6:50 am Post subject: |
|
i also have this problem. i got this tv for free and was curious how much it would cost to have these replaced, or is this basically just a paperweight now.
also, if anyone could link me to some tech info to read up on this further.
thanks for any info |
|
|
| vc |
| Posted: Fri Dec 11, 2009 2:47 am Post subject: Re: HP-R4252 looks like yours |
|
| Samsung actually extended my warranty to cover the cost of parts and labor. It was because there was a mix up with Samsung and the repair shop that was supposed to evaluate my TV. I complained to Samsung but wasn't expecting too much because I was out of warranty. However, Samsung paid for the repair because of the inconvenience. I was surprised and pleased that they offered that to me. |
|
|
| minnie |
| Posted: Mon Dec 07, 2009 2:58 am Post subject: Re: HP-R4252 looks like yours |
|
Sounds about right, how much did they charge?
| VC wrote: | I just had my HP-R4252 repaired on 12.05.09 and it looked exactly like these photos. The picture is covered in horizonal, broken lines and the color is predominately red. They lines are grouped together in large bands across the screen.
The tech replaced the Y-Buffer boards (Up) and (Low) in about 20 minutes.
Samsung BN96-02034A BOARD, Y BUFFER UPPER ASSY
Samsung BN96-02216A BOARD, Y LOWER BUFFER ASSY | |
|
|
| VC |
| Posted: Sun Dec 06, 2009 4:50 pm Post subject: HP-R4252 looks like yours |
|
I just had my HP-R4252 repaired on 12.05.09 and it looked exactly like these photos. The picture is covered in horizonal, broken lines and the color is predominately red. They lines are grouped together in large bands across the screen.
The tech replaced the Y-Buffer boards (Up) and (Low) in about 20 minutes.
Samsung BN96-02034A BOARD, Y BUFFER UPPER ASSY
Samsung BN96-02216A BOARD, Y LOWER BUFFER ASSY |
|
|
| fmcvett |
| Posted: Mon Jul 13, 2009 7:49 pm Post subject: Same problem but, |
|
| Same problem to start with but now has NO picture with sound. Could it be one or both of the boards? |
|
|
| minnie |
| Posted: Fri Jul 03, 2009 3:19 am Post subject: |
|
| yes this was me |
|
|
| Tushy |
| Posted: Thu Jul 02, 2009 2:39 am Post subject: |
|
Hi minnie and thanks for the reply.
Is there any way to determine if it's the Y sustain or the Y buffers?
When I mess with each of the pots on the Ysus it does affect the picture. Not sure if this means it's functioning or not.
Thanks! |
|
|
| minnie |
| Posted: Mon Jun 29, 2009 2:02 am Post subject: |
|
| I'd say Y sustain and Y driver boards need to be replaced. You need to check the VS and VA voltage along with the vset. |
|
|