| Author |
Message |
| gp_45 |
 Posted: Thu Jul 23, 2009 12:45 am Post subject: |
|
| the problem was with the setting for one of the system options...specifically S47 (APC CLK)...value had to be changed from 000 to 001 |
|
 |
| gp_45 |
| Posted: Thu Jul 23, 2009 12:43 am Post subject: |
|
got the tv working properly again. thanks jaeverelec and jts1957 for providing great leads...you folks tipped me off to changes that needed to be done in service menu....
And Justmanuals, thanks but no thanks...got the service manual for free on this very site! |
|
|
| jts1957 |
| Posted: Tue Jul 21, 2009 12:11 pm Post subject: |
|
I don't believe it's a PAL system set. |
|
|
| Justmanuals |
|
|
| Guest |
| Posted: Tue Jul 21, 2009 6:36 am Post subject: |
|
thanks jaeverelec and minnie for your suggestions. before checking ICs, I think I will try out menu options...
jaeverelec, how do i check if TV is set in PAL signal? And how do I try set service menu? |
|
|
| jaeverelec |
| Posted: Sun Jul 12, 2009 6:24 am Post subject: jvc |
|
| gp_45 wrote: | | Any thoughts on why the on-screen menu items come up with proper color, but the picture does not? | as minnie wrote,check the jungle ic,maybe its loose in connection,the location of that ic is in the mid i think,if your son pour a little amount of water into the front panel control,i think i won't go near the ic.check if the tv is set in pal signal,have you tried set service menu?have a good day  |
|
|
| minnie |
| Posted: Wed Jul 08, 2009 4:03 am Post subject: |
|
| minnie wrote: | | Jungle IC processes the color. | |
|
|
| gp_45 |
| Posted: Wed Jul 08, 2009 3:51 am Post subject: |
|
| Any thoughts on why the on-screen menu items come up with proper color, but the picture does not? |
|
|
| gp_45 |
| Posted: Tue Jun 30, 2009 10:43 pm Post subject: |
|
have waited for about 2 weeks now... have also removed back cover and kept the set out where it can receive direct sunlight.
I did not see him put the water in the back, but saw some water in the front of the screen/menu buttons. He cannot reach the back area.
Initially, I thought maybe the tuner is off, because the reception is like what you may receive when the signal is weak. But when I connected just the DVD player, the picture quality is the same.
The thing that I find surprising is that the onscreen menu items come up with the proper colors (with the correct black background). It is only the picture that is like this. It becomes better when I turn the color down to black and white using remote or thru menu buttons on the set. |
|
|
| jts1957 |
| Posted: Tue Jun 30, 2009 1:45 am Post subject: |
|
Have you tried waiting until the set fully dries out?  |
|
|